The Hikvision wireless bridge DS-3WFB-EI-5ACG carries an IP network between buildings or distant points where cabling is not practical. Cloud management supports link supervision, diagnostics and reliable connectivity in professional outdoor installations.
| Wireless standard | IEEE 802.11/a/n/AC |
|---|---|
| Air-interface speed | ≤ 867 Mbps |
| Operating frequency | 5150 MHz a 5825 MHz |
| Transmission power | 27±2 dBm |
| Receive sensitivity | -90±2 dBm a AC80-MCS0 |
| Access technology | TDMA, DFS, TPC, IFM, IPM |
| Network interface | 2 x 1000 Mbps RJ45 |
| Physical selectors | 1 x DIP Switch (AP/CPE), 1 x DIP SSID (4-pin) |
| LED indicators | Power, LAN and signal-strength indicators |
| Power supply | PoE standard 802.3af (36V-57V) / 48V 0.32A |
| Power consumption | typical 2.65 W / Maximum 4.5 W |
| Protection rating | IP55 |
| Operating temperature | -30 °C a 60 °C |
| Operating humidity | 5% a 95% Non-condensing |
| Installation mode | Mast or pole mounting |
| Device dimensions | 103.6 mm x 198.4 mm x 58.3 mm |
| Net weight | 0.3 kg |
| Supported protocols | NTP, SADP, HTTPS, HTTP, SSH |
| Management method | Cloud (HCP/HPP), Web, iVMS-4200 |
IP links between buildings, remote cameras, perimeters and outdoor locations without network cabling.
Mount the unit on a pole with line of sight, then set channel, power and AP/CPE mode. Use PoE power and maintain IP55 protection at connectors and cabling.
Check power, connectivity, cabling and compatibility with the rest of the system.
Yes, when configured with the compatible platform or application stated in the technical specification.
The confirmed contents are listed in the Package contents section of this page.
Data sheet
Specific References
PRODUCT TYPE
PRODUCT TYPE
CCTV ACCESSORIES
NETWORKING AND CABLING
POWER SUPPLY AND INSTALLATION
Please sign in first.
Sign in
Create a free account to use wishlists.
Sign in
EN
ES 
PT 
FR 
