The Hikvision PoE switch DS-3E1510P-SI-8P2F centralises power and communications for IP devices in a professionally managed network. Remote PoE port control supports diagnostics, device recovery and traffic segmentation without physical intervention at every endpoint.
| Brand | Hikvision |
|---|---|
| PoE copper interfaces | 8 × 10/100/1000 Mbps RJ45 (Ports 1 to the 8) |
| Fibre interfaces | 2 × 10/100/1000 Mbps slots modular SFP (Uplink) |
| Switching capacity | 20 Gbps backplane switching capacity |
| Data forwarding rate | 14.88 Mpps (Packet Forwarding Rate) |
| MAC address table | 8000 independent logical entries |
| Internal data buffer | 4.1 Mbit internal buffer |
| PoE standards | IEEE 802.3af (15.4W), IEEE 802.3at (30W) |
| PoE pin assignment | power in 8 pines: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| Power capacity | 110 W total PoE budget (30 W maximum per PoE port) |
| Long-range mode | Supported on ports 1–8 with an extended range of up to 300 m |
| PoE watchdog | Supported on ports 1–8; detects and restarts unresponsive powered devices |
| Loop redundancy | prevention using protocols 802.1D STP, 802.1w RSTP and G.8032 ERPS |
| Network segmentation | VLAN 802.1Q (IDs 1-4094), Bracket of Mode Trunk and Access |
| Link aggregation | supports groups static (Up to 8 groups of aggregation) |
| Traffic control | QoS (SP, WRR), control of storms (Broadcast/Multicast), limiting of rate |
| Layer 2 security | DHCP Snooping, Isolation of Ports, lists ACL (64 inputs) e IPSG (MAC binding/IP) |
| Network diagnostics | detection smart of cables (short/length) and LLDP 802.1ab |
| Device management | Web GUI local (Super IP fixed: 10.180.190.200), Hik-Partner Pro, Hik-Central Pro, SNMP v1/v2c |
| Chassis construction | housing of material metal resistant |
| Installation options | Designed for desktop installation |
| Electrical protection | 6 kV surge and transient immunity |
| Input power supply | External power supply included (54 V DC, 2.22 A) |
| Net power consumption | consumption in idle: 5 W / consumption Maximum of the system: 120 W |
| Global certifications | CE-EMC, CB/CE-LVD, CE-RoHS, WEEE, REACH |
| Operating temperature | 0 °C a 45 °C (0 °F a 113 °F) |
| Storage temperature | -40 °C a 85 °C (-40 °F a 185 °F) |
| Operating humidity | 5% a 95% RH (humidity relative Non-condensing) |
| Chassis dimensions | 217.6 mm × 27.6 mm × 108.5 mm (width × Alto × depth) |
| Device net weight | 0.58 kg (1.28 lb) / weight gross with packaging: 1.37 kg (3.02 lb) |
Surveillance, access-control and other IP networks requiring centralised PoE power.
Connect the supplied power adapter and keep within the 110 W total PoE budget. Configure VLAN, redundancy and extended mode for the network topology and device load.
Check power, connectivity, cabling and compatibility with the rest of the system.
Yes, when configured with the compatible platform or application stated in the technical specification.
The confirmed contents are listed in the Package contents section of this page.
Data sheet
Specific References
PRODUCT TYPE
PRODUCT TYPE
CCTV ACCESSORIES
NETWORKING AND CABLING
POWER SUPPLY AND INSTALLATION
Please sign in first.
Sign in
Create a free account to use wishlists.
Sign in
EN
ES 
PT 
FR 
