The Hikvision UPS DS-UPS1000-R/EU protects electronic equipment against brief outages, voltage fluctuations and power failures. Battery backup keeps compatible recorders, switches, routers or other devices running temporarily and supports a controlled shutdown.
| Power | 1000VA / 600W |
|---|---|
| Input voltage range | 140 - 300Vac |
| Input frequency | 50/60Hz autoadaptable |
| Input plug | EU (Schuko) |
| Outputs | 2x EU (Schuko) |
| Output voltage range | 220–230 V AC (±10%) / simulated sine wave |
| Output frequency | 50/60Hz ±0.5Hz autoadaptable |
| Transfer time | <10ms |
| Battery type | Maintenance-free VRLA AGM lead-acid battery |
| Number of batteries | 1x 12V / 9Ah |
| Recharge time | 4–6 hours to 90% capacity |
| Approximate backup time (100 W) | 20 - 25min |
| Communication ports | not |
| Protection devices | Overload, deep discharge and short-circuit protection |
| Indicators | LED display: line mode, battery and fault. Audible alarm: battery mode, low battery, overload and fault. |
| Operating temperature | 0°C - 40°C |
| Operating humidity | 0 a 90% |
| Dimensions | 276.1 x 101 x 142mm |
| Weight | 4.76Kg |
Protection for NVRs, DVRs, switches, routers, controllers and other compatible low-power equipment.
Connect only equipment whose combined load remains below 600 W. Complete the first full charge and maintain adequate ventilation around the unit.
Yes. A 12 V, 9 Ah VRLA AGM battery is included.
The specification estimates 20 to 25 minutes at a 100 W load.
Rated output power is 600 W and must not be exceeded.
Data sheet
Specific References
PRODUCT TYPE
PRODUCT TYPE
CCTV ACCESSORIES
NETWORKING AND CABLING
POWER SUPPLY AND INSTALLATION
Please sign in first.
Sign in
Create a free account to use wishlists.
Sign in
EN
ES 
PT 
FR 
