- Stationary autonomous CCTV tower
- 14 kWh battery bank
- Four 460 W solar panels
- Electric mast up to 7 m
- Corrosion-resistant outdoor chassis
Main features of stationary solar CCTV tower Safire TRAILER-14KWH-460-6M
The stationary solar CCTV tower Safire TRAILER-14KWH-460-6M is designed for fixed surveillance of industrial perimeters, construction sites, isolated facilities and outdoor areas without mains power that require high energy reserve.. It combines solar generation, energy storage and camera support in a professional tower designed for autonomous outdoor surveillance.
- Photovoltaic array with 4 x 460 W panels
- Gel battery bank with 14 kWh capacity
- Electric telescopic mast up to 7 m
- IT6415NC G3 BLE controller with Bluetooth
- 12, 24 and 48 V DC power distribution
- Integrated PoE switch for cameras
- Wind resistance up to 117 km/h
- Q235 steel chassis with anti-corrosion treatment
Technical specifications
| Model | Cube-1200S |
|---|---|
| Equipment type | Stationary solar CCTV tower |
| Transport dimensions | 1370 x 1370 x 2400 mm |
| Operating dimensions | 5471 x 5281 x 7384 mm |
| Total weight | 1351 kg (2978 lb) |
| Main material | Q235 steel |
| Surface treatment | Outdoor use + anti-corrosion treatment |
| Nominal system voltage | DC 48V |
| Operating temperature | -20°C to 60°C |
| Solar panel configuration | 4 x 460W |
| Solar open-circuit voltage | DC 39.33V |
| Solar cell efficiency | 22.3% |
| Solar tilt adjustment | 60 degrees, electric elevation |
| Battery type | Gel (Aokela brand) |
| Battery bank capacity | 14 kWh |
| Individual battery voltage | DC 12V |
| AC charger power | 2.5 kW |
| AC charger frequency | 50 Hz |
| AC charger efficiency | 93% |
| AC input connection | AC 230V |
| Solar controller type | IT6415NC G3 BLE |
| Controller connectivity | Integrated Bluetooth |
| MPPT conversion efficiency | 95%+ |
| Electrical protection systems | Overvoltage, overcurrent, short circuit and reverse-polarity protection |
| Maximum mast height | 7 metres (22.97 feet) / 5 sections |
| Mast treatment | Galvanised Q235 steel |
| Mast lifting mechanism | Electric winch |
| Hoisting cable | 304 stainless steel, 5mm diameter |
| Internal mast wiring | Coiled cable with 2x Cat5e + 14x power |
| Top load range | 5 kg to 50 kg (11 lb to 110 lb) |
| Maximum wind resistance | 117 km/h (72.7 mph) |
| Levelling stabilisers | 4x manual, galvanised |
| Camera pre-wiring | Factory-installed 12V, 24V and 48V DC lines |
| Integrated network interface | Standard PoE switch |
| Warning lighting | 4x strobe lights |
| Manufacturer warranty | 2 years |
Package contents
- 1x Cube-1200S solar CCTV tower
- 1x Manuals and technical documentation
- 4x Mechanical levelling stabilisers
Recommended applications
Fixed surveillance of industrial perimeters, construction sites, isolated facilities and outdoor areas without mains power that require high energy reserve.
Installation and configuration
The product is intended for outdoor installation and provides IP65 protection. Network and power distribution is provided through switch PoE integrado. Before installation, verify compatibility with Cámaras CCTV PoE y equipos 12/24/48 V DC, as well as the voltage and consumption of the connected equipment.
Frequently asked questions (FAQ)
What battery capacity does it provide?
The battery capacity specified for this model is 14 kWh.
What solar power does it use?
The technical data specifies solar power of 1840 W (4 x 460 W).
What PoE connectivity does it include?
The solution provides switch PoE integrado for compatible equipment.
Data sheet
- Brand
- Safire
- Technology
- Solar fotovoltaica
- Wi-Fi
- No
- IP Rating
- IP65
- Power supply
- Switch PoE integrado
- Use
- Outdoor
- Product type
- Sistema de alimentación autónoma
- Subtype
- Torre solar estacionaria para CCTV
- Compatibility
- Cámaras CCTV PoE y equipos 12/24/48 V DC
Specific References
- EAN13
- 8435325499369