The solar Smartbox for CCTV Safire SF-BOX3030DC4POE-LITIO is designed for solar power and PoE connectivity for CCTV cameras on poles, construction sites, perimeters and outdoor locations.. Its purpose is to centralise and protect system power and communications in one cabinet, supporting a safer, tidier installation that is easier to maintain in the field.
| Solar input | Input solar DC, <45VDC (the voltage must be higher than that of the connected battery) |
|---|---|
| Protection | IP65 |
| Battery | compatible with a non-included lithium or lead-acid battery selectable by DIP switch |
| DC output | Output of 12V DC remotely controllable with voltage and current detection and backup power |
| Booster | DC12V to DC53.5V, 120W |
| Circuit breakers | two-pole DC circuit breaker of 25 A x 1; single-pole DC circuit breaker of 16 A x 1 |
| SPD | 2-pole DC surge protection device, 20 kA |
| MPPT | Battery voltage: 12V solar input voltage: <45V MPPT efficiency: >99% Discharge current: 10A |
| RS485 | Standard RS485 interface |
| Alarm input | 2 channels, dry-contact input Channel 1 is the default for open/closed door detection |
| Reset button | >5s press restore the default factory configuration |
| LCD screen | Size: 2,4 inches resolution: 320 x 240 |
| Cable glands | 4 x M25+5 x PG7 |
| Press-fit waterproof plug | 2 x M5 |
| Operating temperature | -20℃~70℃ |
| Storage temperature | -40℃~85℃ |
| Relative humidity | 0~95% (Non-condensing) |
| Dimensions | 300mm × 300mm × 200mm |
| Material | Metal |
| Clamp diameter | 400mm |
| Power consumption | consumption self <10W, PoE output 110W Max. |
| Ethernet ports | ports 1 and 2: 10/100/1000Base-T, 90 W, PoE, RJ45 (IEEE 802.3bt, also compatible with IEEE 802.3af/at); ports 3 and 4: 10/100/1000 base-T, 30 W, PoE, RJ45 (IEEE 802.3af/at) |
| SFP port | slot SFP 51000Base-X |
| PoE | Maximum output of 90 W for 1 o 2 ports, and of 30 W for port 3 and 4 |
| Standard | IEEE802.3, IEEE802.3u, IEEE802.3z |
| Indicators | Power: 1 *network; Downlink 1~4: in the connector RJ45, the green LEDs indicate link/activity, the yellow LEDs indicate PoE. Uplink 5: the green LEDs indicate link/activity. |
Solar power and PoE connectivity for CCTV cameras on poles, construction sites, perimeters and outdoor locations.
The product is intended for outdoor installation and provides IP65 protection. Network and power distribution is provided through 4 PoE ports. Before installation, verify compatibility with Lithium and lead-acid batteries, as well as the voltage and consumption of the connected equipment.
The solution provides 4 PoE ports for compatible equipment.
Yes. The product is designed for outdoor use and provides IP65 protection.
Compatibility with Lithium and lead-acid batteries must be checked together with the power requirements of the connected equipment.
Data sheet
Specific References
PRODUCT TYPE
PRODUCT TYPE
CCTV ACCESSORIES
NETWORKING AND CABLING
POWER SUPPLY AND INSTALLATION
Please sign in first.
Sign in
Create a free account to use wishlists.
Sign in
EN
ES 
PT 
FR 
