This Hikvision managed PoE switch centralizes connectivity and power for IP cameras and other network devices. Its 24 Gigabit PoE ports, two SFP uplinks and 370 W total budget support organized CCTV installations with Layer 2 management. The metal rack-mount design allows integration into communications cabinets.
| Specification | Value |
|---|---|
| Product category | Layer 2 smart managed switch (Smart PoE Switch) |
| Copper PoE interfaces | 24 × 10/100/1000 Mbps RJ45 (Ports 1 to 24) |
| Fibre interfaces | 2 × 10/100/1000 Mbps Ranuras modulares SFP (Uplink) |
| Switching matrix | 56 Gbps of backplane switching capacity |
| Data forwarding rate | 41.66 Mpps (Packet Forwarding Rate) |
| MAC address table | 8000 independent logical entries |
| Internal data buffer | 4.1 Mbits of intermediate cache memory |
| PoE standards | IEEE 802.3af (15.4W), IEEE 802.3at (30W) |
| PoE pin assignment | Power on 8 pins: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| Power budget | Total budget of 370W (Máximo of 30W per port PoE) |
| Long-range mode | Supported in ports 1 to 24 with extended reach up to 300 metres |
| PoE watchdog | Supported in ports 1 to 24 (Detección and reinicio of cámaras bloqueadas) |
| Loop redundancy | Prevention through protocols 802.1D STP, 802.1w RSTP and G.8032 ERPS |
| Network segmentation | VLAN 802.1Q (IDs 1-4094), Support for Trunk and Access |
| Link aggregation | Supports static groups (Up to 8 logical aggregation groups) |
| Traffic control | QoS (SP, WRR), Storm control (Broadcast/Multicast), Rate limiting |
| Layer 2 security | DHCP Snooping, Port isolation, ACL lists (64 entradas) e IPSG |
| Network diagnostics | Smart cable detection (Short circuits/Length) and LLDP 802.1ab |
| Device management | Web GUI local (Super IP fija: 10.180.190.200), Hik-Partner Pro, Hik-Central Pro, SNMP v1/v2c |
| Chassis construction | Carcasa of material metálico resistente |
| Installation options | Diseñado for rack cabinet mounting (Equipado with orejas of fijación) |
| Electrical protection | Surge and impulse immunity of 6 kV |
| Input power | 100 a 240 V AC, 50/60 Hz, Máx. 7 A |
| Power consumption | Consumo in reposo: 20 W / Maximum consumption del sistema: 400 W |
| Global certifications | CE-EMC, CB/CE-LVD, CE-RoHS, WEEE, REACH |
| Storage temperature | -40 °C a 85 °C (-40 °F a 185 °F) |
| Operating humidity | 5% a 95% (Humedad relativa non-condensing) |
| Chassis dimensions | 440.0 mm × 44.0 mm × 220.8 mm (Width × Height × Depth) |
| Net device weight | 2.81 kg (6.19 lb) |
Recommended for CCTV networks with multiple PoE cameras, Gigabit fibre uplinks and centralized supervision.
Mount the switch in a rack, connect AC 100–240 V and distribute loads without exceeding 30 W per port or 370 W total. Configure VLAN, STP and PoE watchdog according to the network design.
It provides 24 Gigabit PoE ports, up to 30 W per port and 370 W total.
Yes. It has two Gigabit SFP slots for uplink connections.
Data sheet
Specific References
PRODUCT TYPE
PRODUCT TYPE
CCTV ACCESSORIES
NETWORKING AND CABLING
POWER SUPPLY AND INSTALLATION
Please sign in first.
Sign in
Create a free account to use wishlists.
Sign in
EN
ES 
PT 
FR 
